A multi-pendant cluster light built from teardrop-shaped frosted glass shades, each paired with a turned brass socket cap and suspended on its own braided cord. All pendants share a single ceiling canopy — the cords descend at varied lengths and arc naturally between fixings on the ceiling, producing a soft swag silhouette across the space below.
A single power feed at the canopy supplies all the pendants through internal wiring, so installation needs only one junction box regardless of how many heads you choose. Available in six configurations from 1 to 6 heads, in three metal finishes.
Features
Swag-Cord Cluster
Multiple pendants share one canopy — cords swag naturally for a soft, organic silhouette.
Single Power Feed
Only the main canopy needs power — internal wiring distributes to all pendants.
Adjustable Cord Heights
Each pendant cord adjusts independently — set staggered drops to suit your space.
Finish Options — Choose at Checkout
Antique Bronze
Warm bronze socket caps and canopy — pairs with cream walls, oak, traditional or transitional palettes.
Black
Matte black hardware — graphic, contemporary, pairs with white walls and modern industrial interiors.
White
Powder-coated white hardware — recedes against light walls, lets the frosted glass take visual lead.
About the glass seam. A subtle line you may notice on the glass shade is a natural seam from the molding-and-finishing process — the shade is shaped in a mold and then frosted, leaving a faint flow line where the mold halves meet. When the light is on, this seam can become more visible because illumination highlights the glass thickness. Choosing a different bulb (lower wattage, frosted, or globe-shape) can make the seam less noticeable. The seam is a feature of mold-formed glass, not a crack or defect.
Configurations — Choose at Checkout
1 Head∅ 12 × H 28 cm∅ 4.7" × H 11"78.7" Cord
2 HeadsEach ∅ 12 × H 28 cmEach ∅ 4.7" × H 11"118" Cord
3 HeadsEach ∅ 12 × H 28 cmEach ∅ 4.7" × H 11"177" Cord
4 HeadsEach ∅ 12 × H 28 cmEach ∅ 4.7" × H 11"236" Cord
5 HeadsEach ∅ 12 × H 28 cmEach ∅ 4.7" × H 11"295" Cord
6 HeadsEach ∅ 12 × H 28 cmEach ∅ 4.7" × H 11"354" Cord
Note on the 4-head configuration. The 4-head version (each pendant ∅ 12 × H 28 cm / ∅ 4.7" × H 11") is wired to two separate junction boxes, not one. Unlike the other configurations, it does not run from a single power feed. If you need the 4-head version supplied as a single-junction-box connection instead, please contact us before placing your order so we can confirm the arrangement for you.
Yes — because each pendant is cord-hung and individually adjustable, this fixture works on flat, sloped, or vaulted ceilings. Set the cords to compensate for the ceiling angle so all pendants hang at your preferred drop heights.
Do all pendants need separate power? +
No — only the main canopy needs to connect to your ceiling junction box. All other pendants in the cluster are wired internally through the canopy, so a single power feed supplies the entire fixture. This applies to the 1, 2, 3, 5, and 6-head configurations. The 4-head version is the exception: it is wired to two separate junction boxes — if you need it as a single-junction-box connection, please contact us before ordering.
Can I adjust the hanging length of each pendant? +
Yes — each pendant cord can be adjusted independently during installation to set your preferred drop height. Cluster fixtures look especially good with staggered heights, so try varying the drops by 4–8" between pendants for a layered effect rather than hanging them all at the same level.
What about the line on the glass shade? +
The faint line you may see on each glass shade is a natural seam from the molding-and-finishing process — the glass is formed in a mold, then frosted, leaving a subtle flow line where the mold halves meet. It becomes more visible when the light is on because illumination highlights the glass thickness. This is a feature of mold-formed glass, not a defect or crack. Using a different bulb (lower wattage, frosted, or globe-shape) can reduce its visibility.
Is it certified? +
The fixture uses premium certified electrical components throughout. Please contact us before ordering if you need certification documentation for your project.
What bulb does it take? +
Each pendant takes one E26 (North America) or E27 (EU/UK/AU) standard-base bulb up to 25W. We recommend warm white (3000K) LED in either G80 globe or A19 shape — the bulb is partially visible through the open bottom of the frosted shade. Bulbs not included.