Thoughtful design
Made with care to bring lasting value to your everyday.
Workstead Signal Wall Lamp
Workstead Signal Wall Lamp
Regular price
£135.00
Regular price
£135.00
Sale price
Unit price
per
Ash Wood · Brass Shade · Pull-Cord Switch
A compact wall lamp built around two honest materials — solid ash for the body, brass for the shade — and one honest gesture: a pull cord to turn it on and off. No touch panels, no apps, no hidden switches. Just the satisfying weight of cord in hand.
The Signal is thoughtful industrial design at its quietest. Small enough to live beside a bed, above a reading nook, or flanking a hallway mirror — and considered enough to sit comfortably in modern, mid-century, and traditional rooms alike.
See It In Action
AC 110V Only · Do Not Use 12V
This fixture uses G4 bi-pin AC 110V bulbs — it is not compatible with low-voltage 12V G4 bulbs. Using a 12V bulb will cause immediate failure or damage the fixture.
When shopping for replacement bulbs, confirm the packaging reads G4 / 110V AC — the bi-pin base looks identical across both voltages.
Shade Finish — Choose at Checkout
Brass
Warm brass shade. Classic pairing with natural ash wood body.
Silver
Brushed silver shade. Cooler contrast against the warm wood tone.
Walnut
Walnut-stained shade. Deeper, richer tone for darker palettes.
All three versions share the same solid ash wood body. Only the shade finish changes. Wood grain varies naturally between units — subtle differences in tone and pattern are part of the material's character.
Dimensions
L 12.5 cm L 4.9″ Length
W 5.5 cm W 2.2″ Width
H 12.5 cm H 4.9″ Height
Materials & Craft
Solid Ash Body
Natural ash wood lamp body. Grain varies — each piece uniquely its own.
Metal Shade
Hand-finished metal. Available in brass, silver, or walnut finish.
Pull-Cord Switch
Tactile pull cord for intuitive on/off. No wall switch required.
Product Notes
G4 · 110V AC Bulb not incl.
Pull Cord On-lamp switch
Hardwired Wall installation
| Dimensions | L 12.5 × W 5.5 × H 12.5 cm / L 4.9″ × W 2.2″ × H 4.9″ |
| Body material | Solid Ash Wood |
| Shade material | Metal |
| Shade finishes | Brass · Silver · Walnut |
| Switch | Pull-cord on lamp |
| Socket | G4 Bi-Pin Base |
| Voltage | AC 110V only |
| Bulb | Sold separately — LED recommended |
| Wiring | Hardwired |
| SKU | RDW-81016 |
Service & Warranty
◇
Defective on Arrival
If your fixture arrives damaged or doesn't function, contact us within 30 days for replacement or refund — no disassembly required.
↻
Parts & Service
Pull cords, shade hardware, and wiring can be serviced. Contact us for replacement parts.
Installation
- Hardwired wall installation — licensed electrician recommended.
- Fits a standard single-gang wall box. All mounting hardware is included.
- Use only G4 AC 110V bi-pin bulbs. Do not substitute with 12V low-voltage bulbs.
- Pull cord controls on/off — a wall switch is optional, not required.
- Do not disassemble the fixture body. If issues arise out of the box, contact us rather than opening the unit.
- For indoor use only. Not rated for bathrooms or damp locations.
FAQ
Why can't I use a 12V G4 bulb? +
The G4 bi-pin base is physically identical in 12V and 110V versions, but the electrical systems are fundamentally different. This fixture is wired for direct 110V AC mains power — installing a 12V bulb will cause it to fail immediately or damage the fixture. Always confirm the bulb packaging reads G4 / 110V AC.
Which bulb do you recommend? +
A warm white (2700K) G4 AC 110V LED bulb at 2–3W gives the most flattering glow. LED is strongly preferred — it runs cool, lasts longer, and is safer in the compact brass shade. Avoid halogen G4 bulbs, which generate significant heat.
How does the pull cord work? +
A fabric pull cord extends from the lamp body. Pull once to turn on; pull again to turn off. Because the switch is on the lamp itself, you don't need a wall switch — the fixture can be wired directly to always-on power.
Is the lamp dimmable? +
The pull-cord switch is a simple on/off mechanism — it does not dim. For dimming, you would need to wire the fixture through a compatible wall dimmer and pair it with a dimmable G4 110V LED bulb. Contact us if you need guidance on dimmer compatibility.
Will the ash wood grain vary between units? +
Yes. Each lamp body is cut from solid ash, so grain pattern, color depth, and subtle tonal warmth differ between units. This natural variation is part of the material, not a defect.
Is the body solid wood or veneer? +
Solid ash wood — not a veneered or engineered substrate. The material has real weight and will age gracefully over time.
What if my fixture arrives defective? +
Contact us within 30 days of delivery with a brief description and photos. We arrange a replacement or full refund — you won't be asked to disassemble the fixture or troubleshoot at home. That's our job.
Downloads
Couldn't load pickup availability
Shipping Information
Shipping Information
Return Policy
Return Policy
Workstead Signal Wall Lamp
Regular price
£135.00
Regular price
£135.00
Sale price
Unit price
per
Illuminate Your World Beautifully
Unique "centrepiece of the party" design
Quality materials and careful detail for proud homeowners
No-fuss shipping and guarantee for peace of mind
4 Reasons Why You'll Love This
Quality materials
Reliable materials selected for comfort, function and durability.
Made for you
Simple details and versatile styles designed to fit your life.
Shop with confidence
Enjoy a considered shopping experience from start to finish.